Our Products : Cleaners (disinfecting and deodorizing) : Ever-Pine

Printer Friendly Version

M.S.D.S. Sheet   -   TECH DATA Sheet

Ever-Pine (NL226)
Pine Odor Disinfectant Cleaner

Description
For disinfecting of precleaned, hard, non-porous, inanimate surfaces in schools and industries. Effective against Staphylococcus aureus and Salmonella choleraesuis according to current AOAC use-dilution standards at 1:32 dilution.

DIRECTIONS FOR USE
It is a violation of federal law to use this product in a manner in consistent with its labeling.

For Deodorizing And Cleaning:
Remove heavy soil, then apply the recommended solution with cloth or mop to thoroughly wet surfaces. Remove soil and thoroughly rinse with potable water before reuse.

For Disinfecting:
To disinfect, preclean surfaces intended for treatment, then apply appropriate use-dilution with a cloth, mop or coarse mechanical spray devise. Spray 6-8 inches from the surface, rub with brush, cloth or sponge. Do not breathe spray. Thoroughly wet surfaces for a contact time of 10 minutes then wipe with a cloth or let air dry.

Rinse all surfaces that come in contact with food such as countertops, appliances, tables and stovetops with potable water before reuse. Do not use on utensils, glassware, dishes and appliances interior surface as a disinfectant.

Prepare a fresh solution daily or more often if the solution becomes visibly dirty or diluted.

For Disinfection Of Toilet Bowls:
Flush toilet, then add 6 ounces directly to bowl water. Swab bowl completely, using a scrub brush, making sure to get under rim and let stand for at least 10 minutes and then flush.

No-Wax Floors:
Cleans floors bright with virtually no filming or dulling the gloss. Add 1/2 cup to 1 gallon warm water, wash floor with sponge or mop and rinse.

Waxed Floors:
Use same as above, usually not necessary to rinse.

Bathroom/Kitchen:
Add ½ cup (4 oz.) to 1 gallon warm water. Apply to precleaned surfaces with a mop, cloth or sponge. Prepare a fresh solution for each use.
* For use in federally inspected meat and poultry as a compound.
For use on all surfaces in inedible product processing areas, nonprocessing areas, and/or exterior areas such as porcelain, sinks, toilet bowls, bathtubs, refrigerators, appliances, countertops, painted woodwork and walls.

Mildewstatic Performance:
Effectively inhibits the growth of mold and mildew and the odors caused by them when applied to precleaned nonporous surfaces. Use ½ cup (4 oz.) to one gallon water. Allow to dry on surface and repeat weekly or more often if mildew growth returns.

ACTIVE INGREDIENTS:
Pine Oil................................................................3.94%
n-Alkyl (C₁₄ - 50%, C₁₂ - 40%, C₁₅ - 10%)
Dimethyl Benzyl Ammonium Chloride.............1.98%
OTHER INGREDIENTS:........................................94.08%
TOTAL..................................................................100.00%

EPA Reg. No. 47371-153-8370 EPA Est. 8370-IL-01


This EPA registered product may not be available for sale in all states. Confirm with Nyco customer service for availability of sale in your state.