 |
|
|
|
Our Products : Floor Care : Strippers and Finish Removers : Dyn-A-Max
Dyn-A-Max (NL147)
Wax & Finish Remover
Description
DYN-A-MAX easily and quickly cuts through heavy build-ups of floor finishes, seals and other fortified coatings for
fast, effective removal.Asynergized blend of special penetrating agents quickly liquefy floor coatings, including those
which have been burnished. Alkaline builders dissolve both seals and finishes for their complete removal from the
floor. Floors are stripped clean and ready for refinishing quickly with a minimum of time and effort. Low foaming,
excellent for use in automatic scrubbers.
Caution: Due to the power of this floor stripper and seal remover, it is recommended that DYN-A-MAX not be used
for purposes other than stripping. It may damage painted walls, woodwork and some older floor tiles.Test floor tiles to
be sure color bleeding and damage does not occur.
| Applications | For Use In: |
Resilient Floors
Terrazzo Floors
Paving Bricks
Concrete Floors
Quarry Tile
Ceramic Tile
|
Schools / Universities
Airports
Retail Grocery
Kitchens
Contract Cleaning
Offices
Health Care Facilities
|
Directions
| Light Build-Up: | 1 part to 10 parts of water |
| Medium Build-Up: | 1 part to 6 - 8 parts of water |
| Heavy Build-Up: | 1 part to 3 - 6 parts of water |
Use with any temperature of water. Best results are obtained using warm to hot water.
Read label for complete use directions, cautions and warnings.
Use appropriate Personal Protective Equipment (PPE)
Chemical & Physical Properties
Color......................................................Clear Red-Straw Liquid
Scent.....................................................Mild Sweet Solvent
pH..........................................................13.5 - 14.0
Solubility in Water................................Complete
Viscosity...............................................Water thin
Specific Gravity....................................1.065
|
|
 |
|
 |
|
