 |
|
|
|
Our Products : Floor Care : Finishers, Sealers, Enhancers : Hard Coat 19
Hard Coat 19 (NL167)
Floor Finish
Description
Dynamically energized polymer emulsion floor coating for all floor and floor maintenance programs. This
custom formula provides a beautiful deep and rich wet look gloss. Durable mark resistant appearance for
extended wear. Excellent for electric high speed burnishing in high traffic areas where optimal gloss and
performance is required. Restores easily with traditional low speed buffers. Superb re-coatability and
ease of maintaining reduces labor and material costs. Dries quickly, non-yellowing and resists film
penetration by dirt and soil. Meets and exceeds slip resistance standards. Can be used as a seal and
finish combination product or as a top coat over sealed floors.
| Applications |
Resilient Floor Tiles
Synthetic Gym Floors
Sealed Wood
Shopping Malls
Commercial & Retail
|
Terrazzo Floors
Rubberized Floors
Schools / Institutions
Grocery Stores
Offices
|
Directions
Apply Hard Coat 19 to clean floors which have been thoroughly stripped or scrubbed and rinsed.
Apply with a clean high quality mop or applicator. Do not contaminate mops/applicators with any
other cleaner or stripper. Apply Hard Coat 19 evenly and uniformly to floor. Allow approximately
15-25 minutes to dry before recoating. During periods of high humidity, additional drying time
between recoating may be necessary.
Chemical & Physical Properties
Form......................................................Opaque white polymer emulsion
Color of Dried Film................................Glossy, clear, non-yellowing
Non-Volatile Solids...............................19%
Coverage.............................................2,000 - 2,500 square feet per gallon
Freeze - Thaw Stability...........................Passes 3 cycles
Re-coatability..........................................Excellent
Removability..........................................Excellent
Slip Resistance......................................Greater than 0.5 coefficient of friction. Meets or exceeds ASTM D2047
|
|
 |
|
 |
|
