NL148A

Dyn-A-Max (aerosol)

Gel Baseboard Stripper

Powerful aerosol clinging gel baseboard cleaner and stripper. Attacks and removes buildups of floor seals, finishes, waxes in corners, along baseboards, next to counters, displays, or wherever buildups are a problem. Gel formulation clings to vertical surfaces for better cleaning performance, and will not run or drip onto floors, woodwork, etc. No offensive odors. Easy to use inverted valve.

Features

  • Gel formulation evenly clings to vertical surfaces for better, faster cleaning
  • Inverted valve – simply point and spray from any position
  • Use from standing position – no need to kneel
  • No offensive odors
Articles You May Find Helpful
Resources
Pack Size Reorder #
12 x 19 oz. can NL148-A12

Documents

Properties

Form: Aerosol Gel

Color: Clear

Scent: Pine Solvent

pH: 11.0 – 12.0

Directions

Read the entire label and SDS for proper use, handling and storage before using this product.

  1. Shake can before using.
  2. Check product on a small inconspicuous area of the surface to be cleaned to make sure the product does not attack/damage surface. Do not spray on painted or varnished surfaces. Wipe off any overspray immediately.
  3. Hold can 6-10 inches from baseboard or surface to be cleaned. Apply a thin even coating.
  4. Wait 3-5 minutes, longer in cases of substantial buildup. Wet scrub surface with an abrasive pad or scrub brush. Repeat until all seal/finish/wax is removed.
  5. Rinse surface with clean water and allow area to dry thoroughly before applying finish.

Contents under pressure. Do not puncture or incinerate container. Do not expose to heat or store at temperatures above 120°F.

*Nonflammable as per CPSC Flame Extension Test as described in 16 CFR 1500.45