GS501

e.Coat

Zinc-Free Floor Finish

e.Coat is an environmentally preferable floor finish that is metal free and contains no zinc or other heavy metals.

e.Coat provides a long lasting high gloss appearance and can be used with most maintenance programs and types of floors.

Non-yellowing film resists penetration of dirt and soil. Meets and exceeds slip resistance standard ASTM D2047.

Features

  • High Gloss
  • Durable
  • Can be maintained with scrub and recoat, spray buffing and high speed burnishing programs

Green Seal logo
This product meets Green Seal™ Standard GS-40 based on effective performance and protective limits on VOCs and human & environmental toxicity. GreenSeal.org.

Articles You May Find Helpful
Resources
Pack Size Reorder #
4 x 1 round gallon GS501-G4
5 gallon pail GS501-P5
30 gallon drum* GS501-D30
55 gallon drum* GS501-D55

 

 

 

 

 

*Indicates non-stocked item. Check with Nyco for ship times.

Documents

Directions

Strip and Recoat:

  1. Thoroughly strip and remove all old wax and finish from floor.
  2. Rinse floor, neutralize if necessary. Allow floor to dry.
  3. Apply uniform coats of finish with clean synthetic mop or applicator.
  4. Allow each coat to dry before applying additional coats of finish.

Scrub and Recoat:

  1. Clean and scrub floor with cleaning solution.
  2. Pick-up residue and rinse floor. Neutralize if necessary.
  3. Apply uniform coats of finish with clean synthetic mop or applicator.
  4. Allow each coat to dry before applying additional coats of finish.