GS003

Concentrated Non-Solvent Cleaner Degreaser

Non-solvent, non-corrosive and non-flammable cleaner and degreaser. Easily loosens oils, grease and other soils for full suspension and removal from a variety of surfaces. Mild pH, safe to use on most water safe surfaces. Can be diluted for all cleaning tasks.

Green Seal logo
This product meets Green Seal™ Standard GS-37 based on effective performance, concentrated volume, minimized/recycled packaging and protective limits on: VOCs and human & environmental toxicity. GreenSeal.org.

Safer ChoiceEPA/Safer Choice recognition does not constitute endorsement of this product. The Safer Choice logo signifies that the product’s formula, as Nyco® Products Company has represented it to the EPA, contains ingredients with more positive human health and environmental characteristics than conventional products of the same type. EPA/Safer Choice relies solely on Nyco® Products Company, its integrity and good faith, for information on the product’s composition, ingredients and attributes. EPA/Safer Choice has not independently identified, that is, via chemical analysis, the ingredients in the product formula, nor evaluated any of Nyco® Products Company non-ingredient claims. EPA/Safer Choice provides its evaluation only as to the product’s human health and environmental characteristics, as specified in the Standard and based on currently available information and scientific understanding.

Pack Size Reorder #
2 x 1 round gallon GS003-G2
30 gallon drum* GS003-D30
55 gallon drum* GS003-D55

 

 

 

 

*Indicates non-stocked item. Check with Nyco for ship times.

Documents

Properties

Color: Clear Green

Scent: No Fragrance Added

pH: 10.5 – 12.5 (Concentrate)

Directions

Concrete and Brick: To remove oil and grease, apply a 32-1 dilution in cold tap water. Allow to penetrate for 10 minutes. Agitate with a stiff bristle brush. Rinse surface clean.

Filter Cleaning: Remove filter from unit. Spray on 32:1 dilution in cold tap water. Allow to remain for 10 minutes. Rinse clean.

Floor and General Cleaning: Dilute 2 oz. per gallon of cold tap water. Mop or wipe on surface for usual cleaning method.

Pressure Sprayer: Dilute at 2 to 4 oz. per gallon in cold tap water depending on soil content and use. Spray on and let soak for heavily soiled areas.