NL147

Dyn-A-Max

Finish and Wax Stripper

Dyn-A-Max is a super powerful floor stripping solution that quickly and easily cuts through the heaviest buildups of finishes, seals, and fortified floor coatings. A synergistic blend of penetrating agents and alkaline builders liquefy floor coatings for fast and complete removal. Dyn-A-Max floor finish stripper emulsifies and removes multiple coats of finish including those that are old and/or are frequently burnished. Floors are stripped clean and ready for refinishing quickly with a minimum of time and effort. The Low-foaming formulation is excellent for use in automatic scrubbers.

Features

  • Powerful emulsifying floor stripper
  • Saves time and labor
  • Cuts through and removes heavy buildups of floor finish
  • Use in health care setting, schools, and retail
  • Nonammoniated floor stripper
Articles You May Find Helpful
Resources
Pack Size Reorder #
4 x 1 round gallon NL147-G4
5 gallon pail NL147-P5
30 gallon drum* NL147-D30
55 gallon drum* NL147-D55

 

 

 

 

 

*Indicates non-stocked item. Check with Nyco for ship times.

Documents

Properties

Color: Red Straw

Scent: Solvent

pH: > 13.5

Directions

Read the entire label and SDS for proper use, handling and storage before using this product.

Wear appropriate PPE. Test for colorfastness using diluted solution in an inconspicuous area. Dilute solution with warm to hot water according to level of buildup.

Recommended dilution ratios of stripper to water are as follows:
Light buildup: 1:12.
Medium to heavy buildup: 1:9.
For extremely heavy buildup: 1:4.

  1. Liberally apply diluted solution to floor. Do not allow floor to dry. Reapply stripping solution as needed to keep floor wet.
  2. Allow solution to remain on floor until the finish has become loosened and can be removed from floor.
  3. Scrub floor with machine and pick up residue from floor. Do not allow loosened material to dry on floor.
  4. Rinse floor prior to recoating. Use of a neutralizing solution in the final rinse will ensure better bonding and performance of future floor coatings.
  5. Reapply Nyco floor seal and/or finish in normal manner.