NL90456
Low Odor Wax Remover
Strips & Removes Floor Waxes, Seals and Finishes
Effective September 1, 2026, Low Odor Wax Remover has been discontinued.
- Boat & Vehicle Care
- Carpet Care
- Chemical Management Systems
- Degreasers
- Descalers & Acid Cleaners
- Disinfectants & Sanitizers
- Drain Maintenance
- Floor Care
- Food Processing & Sanitation
- Food Service & Warewash
- Bar Glass Washes
- Delimers & Descalers
- Floor Cleaners and Degreasers
- Food Contact Sanitizers
- Freezer Cleaners
- Ice Machine Cleaners
- Oven, Grill & Fryer Cleaners
- Pest Control
- Pot & Pan Detergents
- PreSoaks
- Rinses
- Safer Choice & Green Certified Warewash Chemicals
- Specialty Cleaners
- Stainless Steel Cleaners
- Warewash Detergents
- Glass Cleaners
- Hand Care
- Laundry
- Multi-Surface Cleaners
- Odor Control
- Pest Control
- Restroom Care
- Bowl Cleaners – Hydrochloric Acid Based
- Bowl Cleaners – Non-acid Based
- Bowl Cleaners – Phosphoric Acid Based
- Concentrated Restroom Chemicals
- Grout Cleaners
- Hand Soaps
- Odor Control
- Ready to Use (RTU)
- Safer Choice & Green Certified Restroom Care
- Shower & Tile Whiteners
- Soap Scum & Limescale Removers
- Urinal Screens
- Surface Polishes & Protectants
Documents
Properties
Appearance: Clear Yellow Liquid
Scent: None
pH: 13.0
Directions
Wear rubber gloves, protective eyeglasses and soled rubber shoes. Avoid skin contact. Immediately rinse with water if contact occurs. Do not use on cork, wood or linoleum floors.
- Test on a small inconspicuous area for compatibility.
- Sweep floors.
- Add 2 cups of stripping solution per gallon of warm water. Add more solution for heavy buildups.
- Liberally apply to a 3′ x 3′ area of floor using sponge mop. Let stand for 5-8 minutes.
- Scrub floor using nylon pad or brush. Keep floor wet. If floor begins to dry, apply more diluted solution.
- Remove solution with clean cloth or sponge.
- Rinse floor with clean water and a clean mop.
- Apply Nyco floor finish.