Mop On Floor Strip

Reduced Rinse Formulation

Mop On Floor Strip is a high powered, fast-acting stripper and emulsifier which removes floor finishes and seals from a variety of floor surfaces. Reduced rinse formulation eliminates the need for repeated rinsing of floors to remove alkaline residue. Powerful penetrating agents and evaporating alkaline builders reduce time and labor costs to strip finishes and sealers including heavy buildups. Excellent for use in hospitals, medical clinics, nursing homes, schools, extended care, grocery stores, commercial buildings, and retail environments.


  • Reduced rinse formulation
  • Nonammoniated
  • Powerful
  • Use in health care setting, schools, and retail
Articles You May Find Helpful
Pack Size Reorder #
4 x 1 round gallon* NL127-G4
5 gallon pail NL127-P5
30 gallon drum* NL127-D30
55 gallon drum* NL127-D55






*Indicates non-stocked item. Check with Nyco for ship times.



Color: Yellow

Scent: Solvent

pH: > 13.0


Read the entire label and SDS for proper use, handling and storage before using this product.

Wear appropriate PPE. Test for colorfastness using diluted solution in an inconspicuous area. Dilute solution with warm to hot water according to level of buildup.

Recommended dilution ratios of stripper to water are as follows:
Light buildup: 1:10.
Medium or heavy buildup: 1: 6.
For extremely heavy buildup: 1: 4.

  1. Liberally apply diluted solution to floor. Do not allow floor to dry. Reapply stripping solution as needed to keep floor wet.
  2. Allow solution to remain on floor until the finish has become loosened and can be removed from floor.
  3. Scrub floor with machine and pick up residue from floor. Do not allow loosened material to dry on floor.
  4. Rinse floor prior to recoating. Use of a neutralizing solution in the final rinse will ensure better bonding and performance of future floor coatings.
  5. Reapply Nyco floor seal and/or finish in normal manner.