Product Menu
Z809-G4_Zing-MS-Aluminum Pontoon-Boat-Cleaner
SDS | Tech Sheet
Z809-G4_Zing-MS-Aluminum Pontoon-Boat-Cleaner

Z809

ZING® Marine Safe Aluminum Pontoon & Boat Cleaner

Marine Safe Formula

ZING® Marine Safe Aluminum Pontoon & Boat Cleaner is best for pontoon owners and detailers who want performance and a higher level of safety than offered by traditional cleaners. It cleans and brightens aluminum, improving both performance and appearance of pontoons. ZING® Marine Safe Aluminum Pontoon Cleaner removes marine deposits, scum, oxidation and algae, and loosens and removes barnacles and zebra mussels. This non fuming, easy-to-use use cleaner can be used daily or anytime in-season to remove waterline stains and marine soils on aluminum pontoons. It is also excellent for removing water scale buildup on exhaust ports and lower units of outboard motors.  Effective on boats that run in both fresh and salt water, Marine Safe Aluminum Pontoon Cleaner is VOC free with no phosphates and no harsh chemical fumes.

Apply with ZING® Mop Applicator or ZING® acid resistant sprayers.

Features

  • Cleans and brightens aluminum!
  • Removes marine stains and oxidation
  • Loosens and removes barnacles and zebra mussels
  • VOC free, phosphate free
  • Contains readily biodegradable ingredients
  • Use on both fresh and salt water boats
Pack Size Reorder #
12 x 1 round quart Z809-Q12
4 x 1 round gallon Z809-G4
55 gallon drum Z809-D55

Documents

Properties

Color: Colorless

Scent: Acidic

pH: <2

 

Directions

Read entire label and directions before using. Do not apply ZING® Marine Safe Aluminum Pontoon & Boat Cleaner. to a dry hot surface. Cool surface by wetting with water. Avoid working in direct sunlight. Wear protective gloves and glasses when using this product. Safe on fiberglass and painted surfaces when used as directed.

HEAVY STAIN: Use ZING® Aluminum Marine Safe Pontoon & Boat Cleaner at full strength.

MILD STAIN: Add 1 part ZING® Marine Safe Aluminum Pontoon & Boat Cleaner to 1 part water.

1. Lightly pre-wet surface to be cleaned before applying ZING® Marine Safe Aluminum Pontoon & Boat Cleaner.

2. Using a ZING® Mop Applicator or ZING® Acid Resistant Spray Applicator, saturate an approximate 4’ square area, applying ZING® from bottom to top.

3. Leave on surface for 3-5 minutes to penetrate heavy stains. Scrub with ZING® Mop Applicator or nylon brush if necessary. DO NOT allow ZING®  Marine Safe Aluminum Pontoon & Boat Cleaner to dry on surface.

4. Rinse thoroughly with warm water.

5. Repeat process on remainder of boat hull, or on same area if necessary to remove stubborn stains.

NOTE: Difficult to remove stains may require additional applications and/or may need to be scrubbed with ZING® Mop Applicator or nylon brush.

Related Products

Z392-G4_Zing-MS-Marine-Parts-Engine-Degreaser

ZING® Concentrated Marine Parts & Engine Degreaser

Z392

Professional strength degreasing for boat surfaces, engine compartments and greasy areas

Z904-G4_Zing-MS-Boat-Hull-Cleaner

ZING® Marine Safe Boat Hull Cleaner

Z904

Cleans and removes marine deposits, scum, algae & stains on boat hulls and outboard motors.

Z495-QPS9_Zing-Pro-Black-Streak-Remover

ZING® Professional Black Streak Remover

Z495

Safely removes black streaks on boat hulls, seats, canopies, jet skis, trailers, RVs.

Z193-ZING-Marine-Power-Degreaser

ZING® Marine Power Degreaser

Z193

This product has been discontinued.

Z194-ZING-Marine-All-Purpose-Cleaner

ZING® Marine All-Purpose Cleaner

Z194

Marine safe, pH neutral all-purpose cleaner