As a Disinfectant, Microban Reclaim Germicidal Cleaner kills: Bacteria: Acinetobacter baumannii, Corynebacterium ammoniagenes, Escherichia coli, New Delhi Metallo-Beta Lactamase (NDM-1), Legionella pneumophilia. Effective against the following (Carbapenem-resistant Enterobacteriaceae) (CRE): Escherichia coli – NDM-1 positive. Klebsiella pneumoniae – NDM-1 positive. Viruses: *Human Coronavirus, *Respiratory Syncytial Virus, *SARS-Related Coronavirus 2 (SARS-CoV-2) (cause of COVID-19), *Adenovirus Type 5, *Adenovirus Type 7. Fungi: Aspergillus niger, 4 Aspergillus fumigatus, Trichophyton interdigitale.
DIRECTIONS FOR USE
It is a violation of Federal law to use this product in a manner inconsistent with its labeling.
Preparation of Disinfectant Use-Solution: Mix 2 oz. per gallon of water (1:64). For heavy-duty use, mix 8 oz. per gallon of water (1:16). Use 8 oz. per gallon of water to kill Adenovirus Type 5 and Type 7.
DISINFECTION / VIRUCIDAL* / FUNGICIDAL / MOLD AND MILDEW CONTROL DIRECTIONS:
Apply use-solution to hard, non-porous surfaces, thoroughly wetting the surfaces, with a cloth, mop, sponge, sprayer or by immersion. Treated surfaces must remain visibly wet for 10 minutes. For Influenza Virus Type A, Human Coronavirus and SARS-CoV-2, treated surfaces must remain visibly wet for 1 minute. Wipe dry with a cloth, sponge or mop or allow to air dry. For visibly soiled areas, a preliminary cleaning is required. For sprayer application, use a coarse spray device. Spray 6 – 8 inches from the surface. Avoid breathing spray.
For fungicidal activity, this product is an effective fungicide against Trichophyton interdigitale in areas such as locker rooms, dressing rooms, shower and bath areas and exercise facilities. Dilute at 2 oz. per gallon of water and allow surface to remain visibly wet for 10 minutes. This product is a one-step2 fungicide at 2 oz. per gallon in 200 ppm hard water and 5% serum.
For mold and mildew: At 2 oz. per gallon, this product will effectively inhibit the growth of mold and mildew and the odors caused by them when applied to hard, non-porous surfaces. Follow disinfection instructions. Repeat treatment every seven days, or more often if new growth appears.
For use as a One-Step Cleaner and Disinfectant by Electrostatic Spraying2: Electrostatic spray application is for efficacy claims with a 10 minute contact time and 1:64 dilution. This application method is not to be used to treat surfaces for sanitization or fungicidal claims. •Ensure bystanders and pets are not present in the room during application. •Clean visibly dirty surfaces prior to spraying. •Wear a N95 filtering facepiece respirator or half face respirator with a N95 filter and eye protection (goggles, face shield or safety glasses) when spraying. •Place the electrostatic spray function in the ON position for electrostatic spray models that have the functionality to toggle ON/OFF. •Hold the sprayer nozzle 12 inches away from the target surface. Starting at the highest point and working down to the lowest point, spray target surfaces using a smooth methodical “S” pattern. To avoid leaving gaps in sprayed surfaces, overlap previously treated surfaces when moving onto subsequent sections. •The target surface must remain visibly wet for 10 minutes. Re-apply product as necessary to keep surface visibly wet for the duration of the contact time. Wipe surfaces dry or rinse or allow to air dry. •Allow the treated room to remain unoccupied for 15 minutes before reentering.
TO SANITIZE NON-FOOD CONTACT SURFACES: Add 2 oz. of Microban Reclaim Germicidal Cleaner per 4 gallons of water (½ oz. of Microban Reclaim Germicidal Cleaner per gallon of water) to sanitize hard, non-porous surfaces. Treated surfaces must remain visibly wet for 60 seconds. Wipe dry with a sponge, mop or cloth or allow to air dry. Do not use in food preparation, food handling and food storage areas. This product is not to be used on glassware, dishware, cookware or utensils.
TO SANITIZE SOFT SURFACES: For spot treatment only. Add 2 oz. per gallon of water (1:64). Apply use solution with a sprayer. Hold bottle 6″ – 8″ from surface and spray until fabric is wet. Fabric must remain visibly wet for 5 minutes. Allow fabric to air dry reapply as necessary. Visibly soiled areas must be cleaned prior to sanitizing.
TO CLEAN AND DEODORIZE: Mix 2 oz. per gallon of water to clean and deodorize hard, non-porous, non-food surfaces. Apply using a cloth, mop, sponge or sprayer. Wipe or allow to air dry. Rinse all surfaces that come in contact with food such as countertops, exteriors of appliances, tables and stovetops with potable water before reuse. Do not use on utensils, glassware and dishes.
Cleaning Solution: Dilute 2 – 4 oz. per gallon of water for cleaning of kitchen counters, tables, walls, bathrooms, toilet seats, mopping floors and large routine applications.
Mopping Solutions, Automatic Scrubbers: 2-4 oz. per gallon of cleaning solution eliminates undesirable odors.
WATER DAMAGE RESTORATION AGAINST ODOR-CAUSING BACTERIA AND FUNGI FOR HOME, INSTITUTIONAL, INDUSTRIAL AND HOSPITAL USE: (Not for use in California) This product is particularly suitable for use in water damage restoration situations against odor causing bacteria on the following porous and semi-porous materials: carpets, carpet cushions, subfloors, drywall, concrete, brick, trim and frame lumber, tackless strip and paneling. Using appropriate dilution, saturate the affected materials with enough product to remain visibly wet for at least 10 minutes.
Sewer Backup and River Flooding: During mitigation procedures, dilute 2 – 4 oz. of the concentrate per gallon of water, allowing for the diluting effect of absorbed water within saturated materials. Remove visible filth or heavy soil along with non-salvageable materials. Saturate all affected areas with a coarse spray device before and after cleaning and extraction.
Carpets, Carpet Cushions and Other Porous Materials such as Subfloors, Drywall, Concrete, Brick, Trim and Frame Lumber, Tackless Strip and Paneling: For water damage from a clean source, extract excess water. Test hidden area for colorfastness. Dilute 2 – 4 oz. of the concentrate per gallon of water, allowing for the diluting effect of absorbed water within saturated materials. Remove visible filth or heavy soil. Saturate all affected areas with a coarse spray device. Roll, brush or agitate into the materials and allow materials to remain visibly wet for 10 minutes. Follow with a thorough extraction. Dry rapidly and thoroughly.
Special instructions For Cleaning Carpet against Odor Causing Bacteria: Use this product in areas such as motels, hotels and schools. Use on wet-cleanable synthetic fibers. Do not use on wool. Vacuum carpet thoroughly prior to cleaning. Test fabric for colorfastness. For portable extraction units: Mix 2 oz. of concentrate per gallon of water. For truck mounted extraction machines: Mix 2 – 4 oz. of concentrate per gallon of water and meter at 4 gallons per hour. For rotary floor machines: Mix 2 oz. of concentrate per gallon of water and apply at the rate of 300 – 500 sq. ft. per gallon. Do not mix this product with other cleaning products. Follow the cleaning procedures specified by the manufacturer of the cleaning equipment. After using the product, set the carpet pile and protect the carpet from furniture legs and bases while drying. Do not over-wet. If applied to stain resistant nylon carpet, apply a fabric protector according to the manufacturer’s directions.
2On hard, non-porous, non-food surfaces
6When used according to the sanitization directions