NL627

Nyco Ever-Pine

One Step Disinfectant and Deodorant

Disinfectant, Cleaner, Mildewstat, Fungicide, Virucide*, Deodorizer for Hospitals, Nursing Homes, Hotels & Motels, Commercial, Institutional, Industrial Sites, Schools, Dairy, Veterinary Clinics, Restaurants, Food Handling and Processing Areas. Effective in hard water up to 400 ppm hardness calculated as Ca CO3 in the presence of 5% soil.

Ever-Pine has demonstrated effectiveness against viruses similar to Monkeypox virus on hard non-porous surfaces. Therefore, this product can be used against Monkeypox virus when used in accordance with the directions for use against Feline Picornavirus and Canine Coronavirus on hard non-porous surfaces with contact time of 10 minutes. Refer to the CDC website at https://www.cdc.gov/poxvirus/monkeypox/index.html for additional information.

Nyco Ever-Pine meets the EPA criteria for use against SARS-CoV-2 that causes COVID-19 when used in accordance with the directions and preparation for use against Human Coronavirus.*

Meets OSHA Bloodborne Pathogen Standard for HIV, HBV and HCV.

EPA Reg. No. 10324-157-8370
EPA Est. 8370-IL-01

This EPA registered product may not be available for sale in all states. Confirm with Nyco Customer Service at 800-752-4754 for availability of sale in your state.

Features

  • Fresh pine scent
  • Virucidal
  • Antibiotic resistant bacterial efficacy
  • Fungicidal / Mildewcidal
  • pH neutral
Articles You May Find Helpful
Pack Size Reorder #
4 x 1 round gallon NL627-G4
5 gallon pail NL627-P5
30 gallon drum* NL627-D30
55 gallon drum* NL627-D55

 

 

 

 

 

*Indicates non-stocked item. Check with Nyco for ship times.

Ever-Pine is effective against the following:

Note: For reference use only. This is a list of all organisms covered by the Ever Pine label. Please see appropriate label directions for use and for proper use dilution.

BACTERIA:  

  • Acinetobacter baumannii
  • Acinetobacter Iwoffi
  • Bordetella bronchiseptica
  • Chlamydia psittaci
  • Citrobacter freundii
  • Enterobacter agglomerans
  • Enterobacter aerogenes
  • Enterobacter cloacae
  • Escherichia coli
  • Escherichia coli O157:H7
  • Escherichia coli (Carbapenem Resistant)
  • Escherichia coli (Extended Spectrum B-Lactamase) (ESBL)
  • Escherichia coli (Tetracycline Resistant)
  • Enterococcus faecalis
  • Enterococcus faecalis (Vancomycin Resistant)} (VRE)
  • Enterococcus hirae
  • Fusobacterium necrophorum
  • Klebsiella oxytoca
  • Klebsiella pneumoniae
  • Klebsiella pneumoniae (Carbapenem Resistant)
  • Listeria monocytogenes
  • Micrococcus luteus
  • Micrococcus luteus
  • Pasturella multocida
  • Proteus vulgaris
  • Proteus vulgaris
  • Pseudomonas aeruginosa
  • Pseudomonas aeruginosa (Tetracycline Resistant)
  • Pseudomonas cepacia
  • Salmonella enterica
  • Salmonella enterica
  • Salmonella enteritidis
  • Salmonella enterica serotype pullorum
  • Salmonella typhi
  • Salmonella typhimurium
  • Serratia marcescens
  • Serratia marcescens
  • Shigella flexneri
  • Shigella flexneri
  • Shigella sonnei
  • Staphylococcus aureus
  • Staphylococcus aureus (Community Associated Methicillin Resistant) (CA-MRSA) (Genotype USA 300)
  • Staphylococcus aureus (Community Associated Methicillin Resistant) (CA-MRSA) (Genotype USA 400)
  • Staphylococcus aureus (Methicillin Resistant) (MRSA)
  • Staphylococcus epidermidis (Ampicillin, Cefazolin, Oxacillin, Penicillin Resistant)
  • Streptococcus agalactiae
  • Staphylococcus haemolyticus
  • Streptococcus pneumoniae (Penicillin Resistant)
  • Streptococcus pyogenes
  • Streptococcus mutans
  • Staphylococcus aureus (Vancomycin Intermediate Resistant) (VISA)
  • Vibrio cholera
  • Yersinia enterocolitica

VIRUCIDAL* PERFORMANCE:

This product is effective against:

  • Avian Influenza A (H5N1) Virus (Reassortant Strain)
  • Avian Influenza A (H3N2) Virus (Avian Reassortant)(VR-2072)
  • Cytomegalovirus ( AD-169)
  • Coronavirus (SARS-associated) (CDC 200300592)
  • Hepatitis B Virus (HBV) (Duck Hepatitis B Virus)
  • Hepatitis C Virus (HCV) (Bovine Viral Diarrhea Virus)
  • Herpes Simplex Virus Type 1
  • Herpes Simplex Virus Type 2
  • Human Coronavirus (VR-740)
  • Human Immunodeficiency Virus Type 1 (HIV 1) (AIDS Virus)
  • Influenza A {(H1N1)} Virus (Strain A/PR/8/34)
  • Influenza A {(H3N2}} Virus (Hong Kong Strain) (VR-544)
  • Respiratory Syncytial Virus (VR-26)
  • Vaccinia Virus (VR-119)

ANIMAL PREMISE VIRUCIDAL* PERFORMANCE:

This product is effective against:

  • Avian Infectious Bronchitis Virus (Strain Beaudette IB42)
  • Avian Influenza A (H5N1) Virus
  • Avian Influenza A (H3N2) Virus (Avian Reassortant)
  • Canine Coronavirus
  • Canine Distemper Virus
  • Canine Parvovirus
  • Feline Picornavirus
  • Infectious Bovine Rhinotracheitis Virus
  • Pseudorabies Virus
  • Swine Influenza A (H1N1) Virus

This product kills the following viruses in 10 minutes at 16 oz. per gal. of 400 ppm hard water and 5% soil on hard, non-porous surfaces: Canine Parvovirus** Rabies Virus**

NON-FOOD CONTACT SANITIZING PERFORMANCE:

This product is an effective one-step sanitizer in 3 minutes at 4 oz. of this product per gal. of 400 ppm hard water (660 ppm active) and 5% soil on hard, non-porous surfaces:

  • Klebsiella pneumoniae
  • Staphylococcus aureus

FUNGICIDAL PERFORMANCE:

 

This product kills the following fungi in 10 minutes at 4 oz. of this product per gal. of 400 ppm hard water (660 ppm active) and 5% soil on hard, non-porous

surfaces:

  • Candida albicans
  • Trichophyton mentagrophytes (Athlete’s foot fungus)

MILDEWCIDAL PERFORMANCE:

This product controls the following mold at 4 oz. of this product per gal. of 400 ppm hard water (660 ppm active) and 5% soil on hard, non-porous surfaces for up to 7 days:

  • Aspergillus niger

*Refer to EPA List N: Disinfectants for Use Against SARS-CoV-2 for additional information. Nyco formulations are listed on the website according to their master EPA Registration numbers.

Documents

Properties

Color: Clear Light Amber

Scent: Pine

pH: 6-8

Directions

DIRECTIONS FOR USE:

It is a violation of Federal law to use this product in a manner inconsistent with its labeling.

Rinse hard, non-porous food contact surfaces with potable water after application of product.

Before using this product in federally inspected meat and poultry food processing plants and dairies, food products and packaging materials must be removed from the room or carefully protected.

This product is not to be used as a terminal sterilant/high-level disinfectant on any surface or instrument that (1) is introduced directly into the human body, either into or in contact with the bloodstream or normally sterile areas of the body, or, (2) contacts intact mucous membranes but which does not ordinarily penetrate the blood barrier or otherwise enter normally sterile areas of the body.

This product can be used to pre-clean or decontaminate critical or semi-critical medical devices prior to sterilization or high-level disinfection.

FOR USE AS A ONE-STEP, GENERAL, HOSPITAL DISINFECTANT, FUNGICIDE, VIRUCIDE*, CLEANER: Pre-clean heavily soiled areas. Apply use solution of 4 oz. of this product per gal. of water (or equivalent use dilution) to disinfect hard, non-porous surfaces with a sponge, brush, cloth, mop, by immersion, auto scrubber, mechanical spray device, hand pump trigger spray device, coarse trigger spray device. For spray applications, spray 6-8 inches from surface. Do not breathe spray. Treated surfaces must remain wet for 10 minutes. Allow to air dry. Rinsing of floors is not necessary unless they are to be waxed or polished. Prepare a fresh solution daily or when visibly dirty.

*KILLS HIV, HBV AND HCV ON PRE-CLEANED HARD, NON-POROUS SURFACES/OBJECTS PREVIOUSLY SOILED WITH BLOOD/BODY FLUIDS in health care settings or other settings in which there is an expected likelihood of soiling of hard, non-porous surfaces/objects with blood or body fluids and in which the surfaces/objects likely to be soiled with blood or body fluids can be associated with the potential for transmission of Human Immunodeficiency Virus Type 1 (HIV-1) (associated with AIDS), Hepatitis B Virus (HBV) and Hepatitis C Virus (HCV).

SPECIAL INSTRUCTIONS FOR CLEANING AND DECONTAMINATION AGAINST HIV-1, HBV and HCV ON SURFACES/OBJECTS SOILED WITH BLOOD/BODY FLUIDS.

Personal Protection: Wear protective latex gloves, gowns, masks and eye protection.

Cleaning Procedure: Blood and other body fluids containing HIV-1, HBV & HCV must be thoroughly cleaned from hard, non-porous

surfaces and objects before application of this product.

Disposal of Infectious Materials: Blood and other body fluids, cleaning materials and clothing must be autoclaved and disposed of according to federal, state and local regulations for infectious waste disposal.

Contact Time: Allow hard, non-porous surfaces to remain wet for 10 minutes for all organisms.

SURGICAL INSTRUMENT PRESOAK: Add 4 oz. of this product per gal. of water (or equivalent use dilution) (660 ppm active). Place pre-cleaned instruments in solution to presoak surgical instruments for a minimum of 10 minutes, then proceed with normal sterilization procedure.

Note: Plastic instruments can remain immersed until sterilization procedure. Metal instruments must be removed after 10 minutes, rinsed, dried, and kept in a clean non-contaminated receptacle until sterilization procedure. Prolonged soaking will cause damage to metal instruments. Surgical instruments must be sterilized before use. Prepare a fresh solution daily or when visibly dirty.

NON-FOOD CONTACT SURFACE SANITIZING DIRECTIONS

NON-FOOD CONTACT SURFACE SANITIZING: Pre-clean heavily soiled areas. Add 4 oz. of this product per gal. of water (660 ppm active). Apply solution to hard, non-porous surfaces with a sponge, brush, cloth, mop, by immersion, auto scrubber, mechanical spray device, hand pump trigger spray device,coarse trigger spray device. For spray applications, spray 6-8 inches from surface. Do not breathe spray. Treated surfaces must remain wet for 3 minutes. Prepare a fresh solution daily or when visibly dirty.

SHOE/BOOT/ENTRYWAY BATH SANITIZER DIRECTIONS: To prevent cross contamination on treated surfaces from area to area, in animal areas, entryways and the packaging and storage areas of food plants, shoe baths containing one inch of freshly made sanitizing solution must be placed at all entrances to buildings, hatcheries and at all the entrances to the production and packaging rooms. Scrape waterproof shoes and place in a 4-8 oz. of this product per gal. of water (660-1320 ppm active) use solution or allow to remain wet for 3 minutes prior to entering area. Prepare a fresh solution daily or when visibly dirty.

TO CONTROL MOLD/MILDEW: Pre-clean heavily soiled areas. Prepare use solution by adding 4 oz. of this product per gal. of water (or equivalent use dilution). Apply use solution to hard, non-porous surfaces which will effectively inhibit the growth of mold and mildew and their odors. Repeat treatment every seven days, or more often if new growth appears.

ANIMAL PREMISES: Prior to use of this product, remove all animals, poultry and feeds from areas to be treated, animal transportation vehicles, and enclosures. Remove all litter, droppings and manure from floors, walls and surfaces of barns, pens, stalls, chutes and other surfaces of facilities and fixtures occupied or traversed by animals. Empty all troughs, racks and other feeding and watering appliances. Thoroughly clean surfaces with soap or detergent and rinse with water.

FOR USE AS AN ANIMAL PREMISE DISINFECTANT/VIRUCIDE*: Prepare a use solution of 4 oz. of this product per gal. of water (1:32) (660 ppm active) for effectiveness against designated animal viruses on the label.

FOR USE AS AN ANIMAL PREMISE DISINFECTANT/VIRUCIDE**: Prepare a use solution of 16 oz. of this product per gal. of water (1:7) (2980 ppm active) for effectiveness against designated animal viruses on the label.

Apply use solution to disinfect hard, non-porous surfaces with a sponge, brush, cloth, by immersion, mechanical spray device, hand pump trigger spray device, coarse trigger spray device. For spray applications, spray 6-8 inches from surface. Do not breathe spray. Immerse all halters and other types offer the  equipment used in handling and restraining animals, as well as forks, shovels, and scrapers used for removing litter and manure in the use solution. Treated surfaces must remain wet for 10 minutes. Ventilate buildings, coops and other closed spaces. Do not house animals or employ equipment until treatment has been absorbed, set or dried. Thoroughly scrub all treated feed racks, troughs, automatic feeders, fountains and waterers and other treated equipment which can contact food or water with soap or detergent, and rinse with potable water before reuse.

NON-ACID TOILET BOWL AND URINAL DISINFECTANT/CLEANING DIRECTIONS

Remove heavy soil prior to disinfection.

From a Concentrate: Add 4 oz. of this product directly into the water in the toilet bowl. Brush thoroughly over exposed surfaces and under the rim with a toilet brush/mop, cloth, or sponge. Allow solution to stand for 10 minutes and flush. 

From a Use Solution: Empty water out of toilet bowl or urinal and apply use solution prepared by adding 4 oz. of this product per gal. of water (660 ppm active) to exposed surfaces, including under the rim with a toilet brush/mop, cloth, or sponge, hand pump trigger spray device, coarse trigger spray device. For spray applications, spray 6-8 inches from surface. Do not breathe spray. Brush or swab thoroughly, then allow solution to stand for 10 minutes and flush.

FOR HEAVY DUTY CLEANING OF TOILET BOWLS AND URINALS: Pre-clean heavily soiled areas. Empty water from toilet bowl or urinal and apply a use solution of 8 oz. of this product per gal. of water to exposed surfaces including under the rim with toilet brush/mop, cloth, or sponge, hand pump trigger spray device, coarse trigger spray device. For sprayer applications, spray 6-8 inches from surface. Do not breathe spray. To aid in soil removal, allow to soak. Brush or swab thoroughly and allow solution to stand for 10 minutes and flush.

FOR USE TO CLEAN AND DISINFECT SHOWER ROOMS, LOCKER ROOMS AND OTHER LARGE, OPEN AREAS WITH FLOOR DRAINS: 1. Pre-clean heavily soiled areas. 2. Apply use solution of 4 oz. of this product per gal. of water (660 ppm active) to floors, walls and ceilings making sure not to over spray. To disinfect, all hard, non-porous surfaces must remain wet for 10 minutes. 3. Scrub using a deck brush or other coarse material as necessary. 4. Rinse surfaces thoroughly and let air dry. 5. Prepare a fresh solution daily or when visibly dirty.

FOR USE AS A GENERAL CLEANER AND/OR DEODORIZER: Apply use solution of 4-8 oz of this product per gal of water (or equivalent use dilution) to hard, non-porous surfaces. Allow to air dry. For heavy-duty use, add 16 oz. of this product per gal. of water to clean hard, non-porous surfaces.

FOR USE AS A CLEANER ON FINISHED FLOORS: To limit gloss reduction, use 4 – 8 oz. of this product per gal. of water. Apply with a damp mop or auto scrubber. Allow surface to air dry.